• EI
  • Scopus
  • 食品科学与工程领域高质量科技期刊分级目录第一方阵T1
  • DOAJ
  • EBSCO
  • 北大核心期刊
  • 中国核心学术期刊RCCSE
  • JST China
  • FSTA
  • 中国精品科技期刊
  • 中国农业核心期刊
  • CA
  • WJCI
  • 中国科技核心期刊CSTPCD
  • 中国生物医学SinoMed
中国精品科技期刊2020
董施彬, 宁亚萍, 杨喆, 张乔会, 董洁琼, 王丰俊, 王建中. 藜麦总黄酮提取及大孔树脂纯化工艺的研究[J]. 食品工业科技, 2015, (16): 272-278. DOI: 10.13386/j.issn1002-0306.2015.16.047
引用本文: 董施彬, 宁亚萍, 杨喆, 张乔会, 董洁琼, 王丰俊, 王建中. 藜麦总黄酮提取及大孔树脂纯化工艺的研究[J]. 食品工业科技, 2015, (16): 272-278. DOI: 10.13386/j.issn1002-0306.2015.16.047
DONG Shi-bin, NING Ya-ping, YANG Zhe, ZHANG Qiao-hui, DONG Jie-qiong, WANG Feng-jun, WANG Jian-zhong. Study on extraction process of quinoa total flavonoids and purification process of macroporous resin[J]. Science and Technology of Food Industry, 2015, (16): 272-278. DOI: 10.13386/j.issn1002-0306.2015.16.047
Citation: DONG Shi-bin, NING Ya-ping, YANG Zhe, ZHANG Qiao-hui, DONG Jie-qiong, WANG Feng-jun, WANG Jian-zhong. Study on extraction process of quinoa total flavonoids and purification process of macroporous resin[J]. Science and Technology of Food Industry, 2015, (16): 272-278. DOI: 10.13386/j.issn1002-0306.2015.16.047

藜麦总黄酮提取及大孔树脂纯化工艺的研究

Study on extraction process of quinoa total flavonoids and purification process of macroporous resin

  • 摘要: 目的:研究藜麦总黄酮的提取工艺与大孔树脂纯化工艺。方法:在单因素实验的基础上,通过正交实验法,研究藜麦总黄酮的最佳提取和纯化工艺。结果:最佳提取工艺条件为:超声时间25 min、温度90℃、料液比1∶10(g/m L)、回流时间为2 h、乙醇浓度90%。此条件下,藜麦总黄酮提取量为3.861 mg/g。盐析除蛋白,选择Na Cl添加量为15%。最佳大孔树脂纯化工艺为:p H2、流速2 BV/h、0.3 mg/m L的黄酮水溶液上样、8 BV水洗、丙酮洗脱。此条件下,纯化黄酮吸附率为80.91%。纯度可由初提物的7.12%提高到28.53%。 

     

    Abstract: Purpose:To study the extraction process of quinoa flavonoids and purification process of macroporous resin. Method:To study the optimal extraction and purification process of quinoa through orthogonal test based on single factor test. Results :The optimal extraction process conditions were :ultrasound time for 25 min,temperature 90 ℃,material and liquid ratio 1∶10(g/m L),refluxing time 2 h,ethanol concentration 90%. The total extracting amount of Quinoa flavonoids under these conditions was 3.861 mg/g. Perform salting-out to remove protein. Select Na Cl additive amount as 15%. The optimal purification process of macroporous resin was:p H2,flow velocity 2 BV/h,0.3 mg/m L flavonoids aqueous solution,8 BV water washing,acetone elution. The purified flavonoids adsorption rate under these conditions was 80.91%. The purity could be improved from 7.12% of the original extracts to 28.53%.

     

/

返回文章
返回