• 中国科技期刊卓越行动计划项目资助期刊
  • 中国精品科技期刊
  • EI
  • Scopus
  • CAB Abstracts
  • Global Health
  • 北大核心期刊
  • DOAJ
  • EBSCO
  • 中国核心学术期刊RCCSE A+
  • 中国科技核心期刊CSTPCD
  • JST China
  • FSTA
  • 中国农林核心期刊
  • 中国开放获取期刊数据库COAJ
  • CA
  • WJCI
  • 食品科学与工程领域高质量科技期刊分级目录第一方阵T1
中国精品科技期刊2020

基于CFD技术的橙汁超高温瞬时灭菌后冷却工艺优化

基于CFD技术的橙汁超高温瞬时灭菌后冷却工艺优化[J]. 食品工业科技, 2012, (18): 295-297. DOI: 10.13386/j.issn1002-0306.2012.18.078
引用本文: 基于CFD技术的橙汁超高温瞬时灭菌后冷却工艺优化[J]. 食品工业科技, 2012, (18): 295-297. DOI: 10.13386/j.issn1002-0306.2012.18.078
Cooling process after UHT orange juice destination optimization based on CFD[J]. Science and Technology of Food Industry, 2012, (18): 295-297. DOI: 10.13386/j.issn1002-0306.2012.18.078
Citation: Cooling process after UHT orange juice destination optimization based on CFD[J]. Science and Technology of Food Industry, 2012, (18): 295-297. DOI: 10.13386/j.issn1002-0306.2012.18.078

基于CFD技术的橙汁超高温瞬时灭菌后冷却工艺优化

基金项目: 

上海市优秀青年基金(ssc09010); 上海市科委工程中心建设(11DZ2280300); 上海市教育委员会重点学科建设项目(J50704);

详细信息
  • 中图分类号: TS255.44

Cooling process after UHT orange juice destination optimization based on CFD

  • 摘要: 果汁热灭菌后需要进行冷却处理,在实际生产中冷却也经常因为过度而导致能源的浪费。本文分析了橙汁包装的耐热温度,利用FLUENT软件对橙汁超高温瞬时灭菌后的冷却工艺进行了模拟。针对热灭菌135℃,13s后果汁中心温度到达80℃时进行冷却,得出了不同温度时冷却的最理想时间条件:20℃(293K),9s;15℃(288K),8s;10℃(283K),8s;5℃(278K),7s;0℃(273K),7s。同时根据逆卡诺循环,计算了各种理想冷却工艺的能耗,根据能耗计算,得出了最优的冷却工艺为20℃(293K),9s。 
    Abstract: Cooling process after the juice thermal sterilization.By now, there has not been the exact cooling process.Excess cooling is the usual style to obtain the qualified juice.After the heat-resistant temperature of the juice package was analyzed, and based on this, orange juice cooling numerical experiment after UHT sterilization numerical experiment was carried out using FLUENT software.The optimization cooling process was obtained: (20℃ (293K) , 9s) , (15℃ (288K) , 8s) , (10℃ (283K) , 8s) , (5℃ (278K) , 7s) and (0℃ (273K) , 7s) .Using Carnot efficiency in Reverse Carnot cycle, the energy consumption in different cooling process was calculated, and the optimized process was:20℃ (293K) , 9s.
  • [1] 仇农学, 罗仓学, 易建华.现代果汁加工技术与设备[M].北京:化学工业出版社, 2006:45-51.
    [2] 李万平.计算流体力学[M].武汉:华中科技大学出版社, 2004:4-17.
    [3]

    Siriwattanayotin S, Yoovidhya T, Meepadung T, et al.Simulation of sterilization of canned liquid food using sucrose degradation as an indicator[J].Journal of Food Engineering, 2006, 73 (4) :307-312.

    [4]

    Abdul Ghani A G, Farid M M, Chen X D, et al.An investigation of deactivation of bacteria in a canned liquid food during sterilization using computational fluid dynamics (CFD) [J].Journal of Food Engineering, 1999, 42 (4) :207-214.

    [5]

    Tattiyakul J, Rao M A, Datta A K.Heat transfer to a canned corn starch dispersion under intermittent agitation[J].Journal of Food Engineering, 2002, 54 (4) :321-329.

    [6]

    Abdul Ghani A G, Farid M M, Chen X D, et al.Thermal sterilization of canned food in a3-D pouch using computational fluid dynamics[J].Journal of Food Engineering, 2001, 48 (2) :147-156.

    [7]

    Abdul Ghani A G, Farid M M.Using the computational fluid dynamics to analyze the thermal sterilization of solid-liquid food mixture in cans[J].Innovative Food Science&EmergingTechnologies, 2006, 7 (1-2) :55-61.

    [8]

    Kannan A, Gourisankar Sandaka P Ch.Heat transfer analysis of canned food sterilization in a still retort[J].Journal of Food Engineering, 2008, 88 (2) :213-228.

    [9]

    Abdul Ghani A G, Farid M M, Chen X D.Numerical simulation of transient temperature and velocity profiles in a horizontal can during sterilization using computational fluid dynamics[J].Journal of Food Engineering, 2002, 51 (1) :77-83.

    [10]

    Farid Mohammed, Abdul Ghani A G.A new computational technique for the estimation of sterilization time in canned food[J].Chemical Engineering and Processing, 2004, 43 (4) :523-531.

    [11]

    Abdul Ghani A G, Farid M M, Chen X D.A computational and experimental study of heating and cooling cycles during thermal sterilization of liquid foods in pouches using CFD[J].J.Process Mechanical engineering, 2003, 217 (Part E) :1-9.

    [12]

    Pomeranz Y.Functional properties of food components[M].Orlando, Fla, USA:Acadenic press, 1985:417-422.

    [13]

    Mc Williams Margaret.Food fundamentals[M].New York:John Wiley&Sons, Inc, 1979:554-555.

    [14] 王金锋, 汤毅, 谢晶, 等.基于计算流体动力学技术的橙汁高温短时灭菌工艺优化[J].食品科学, 2010, 31 (22) :115-118.
    [15] 王金锋, 汤毅, 谢晶, 等.罐装橙汁超高温瞬时灭菌的数值模拟研究[J].工程热物理学报, 2012, 33 (2) :288-290.
    [16] 薛敏.用于热成型包装的耐热性更高的生物塑料[J].现代塑料加工应用, 2008 (4) :63.
    [17] 刘建学, 纵伟.食品保藏原理[M].南京:东南大学出版社, 2006:128-138.
  • 期刊类型引用(13)

    1. 易超,李杰,蒋双丰,郑杰. 信阳茶叶研究进展. 广东茶业. 2024(02): 2-8 . 百度学术
    2. 刘海波,王恩胜,陈晖,郭浩奇,陈龙. 信阳毛尖茶末营养成分分析及对其对年糕保质期的影响. 粮食与食品工业. 2023(04): 28-31 . 百度学术
    3. 叶美芝,伍紫仪,吴金松,钟青萍. 山药皮多糖的分离纯化、结构特征及体外抗氧化活性研究. 食品工业科技. 2023(19): 78-85 . 本站查看
    4. 陈龙,陈晖,夏渠程,朱静. 茶末/CMC-Na/AL-Na复合膜制备及性能测定. 包装工程. 2023(19): 121-128 . 百度学术
    5. 宋晨光. 植物多糖抗氧化活性研究进展. 中国果菜. 2022(04): 25-33 . 百度学术
    6. 李思雨,刘红全,孙寒,徐琰杰,黄磊恒,龙寒,凌宏林,成江弈,杨堃峰. 小球藻胞内多糖提取纯化及其抗氧化活性. 食品工业科技. 2022(15): 209-219 . 本站查看
    7. 王越,翟佩佩,鲍锋,张富坤,赵盼,李佳,赵东升. 基于“成分-抗氧化”关联的不同发酵程度茶及茶饮料比较评价. 湖北农业科学. 2022(16): 159-163 . 百度学术
    8. 袁佩颖,杨潇剑,吴振威,荣倩倩,张姝,任移嵘. 信阳毛尖茶残次品中茶多酚提取工艺优化及抗氧化性研究. 天津农业科学. 2022(10): 54-59+72 . 百度学术
    9. 张恒,郑俏然,何靖柳,韦婷,刘翔,章斌. 藏茶玫瑰乌梅无糖复合饮料研制及功能性成分分析与抗氧化研究. 食品科技. 2021(01): 46-53+61 . 百度学术
    10. 邓云兵,黄冬琴,岳天翔. 淡竹叶多糖的大孔吸附树脂纯化工艺及对小鼠运动耐力的影响. 食品工业科技. 2021(14): 169-174 . 本站查看
    11. 柯钦豪,马慧敏,曹琴,王世越,周宏福,郑敏. 植物多糖的分离研究进展. 湖北科技学院学报(医学版). 2021(04): 360-364 . 百度学术
    12. 王钊,李长滨,李凤娇,李玉江,张本尚,邹建. 酸法提取黑蒜多酚及抗氧化性研究. 中国食品添加剂. 2021(10): 15-22 . 百度学术
    13. 国琦,梁双敏,葛长荣,肖智超. 黑松露多糖提取工艺优化及体外抗氧化活性分析. 现代食品科技. 2021(12): 187-196+308 . 百度学术

    其他类型引用(3)

计量
  • 文章访问数:  151
  • HTML全文浏览量:  18
  • PDF下载量:  123
  • 被引次数: 16
出版历程
  • 收稿日期:  2012-03-06

目录

    /

    返回文章
    返回
    x 关闭 永久关闭