响应面法优化棕榈油基焙烤专用脱模剂制备工艺及其脱模特性

王冉冉; 蒋子敬; 谢凌宇; 车振明; 邢亚阁; 牛跃庭; 韩文凤; 罗静

doi:10.13386/j.issn1002-0306.2017.12.038

响应面法优化棕榈油基焙烤专用脱模剂制备工艺及其脱模特性

西华大学食品与生物工程学院粮油与食品安全省级重点实验室
大马棕榈液油技术研发(上海)有限公司/MPOB
漯河职业技术学院

基金项目:

西华大学粮油工程与食品安全省级高校重点实验室项目(szjj2015-005)；

详细信息

作者简介:
王冉冉 (1990-) , 女, 硕士研究生, 研究方向:果蔬保鲜与加工技术, E-mail:1241255282@qq.com。;

罗静 (1985-) , 女, 硕士研究生, 实验师, 研究方向:食品加工技术, E-mail:195398398@qq.com。;

中图分类号: TS202.3
计量
- 文章访问数: 210
- HTML全文浏览量: 29
- PDF下载量: 104
出版历程
- 收稿日期: 2017-01-04

Optimization for preparation process of palm olein-based special baking release agent by response surface methodology and its mold release activity

Provincial Key Laboratory of Grain, Oil and Food Safety, College of Food and Bioengineering, Xihua University
Palm Oil Research and Technical Service Institute of MPOB ( PORTSIM)
Luohe Vocational Technology College

摘要

摘要: 选用棕榈液油（Palm olein）作基料,巴西棕榈蜡（Carnauba Wax）做辅料,添加各种乳化剂,制备棕榈油基焙烤专用脱模剂。通过单因素实验和Central Composite Design（CCD）响应面实验,建立棕榈油基焙烤专用脱模剂乳化分层指数和黏度的多元回归模型,确定棕榈油基焙烤专用脱模剂最佳配方及乳化工艺为:棕榈蜡添加量5.03%、大豆卵磷脂添加量2.0%、聚甘油蓖麻醇酯（PGPR）-单甘酯复配比例2∶3、PGPR-单甘酯复配添加量1.0%、复合稳定剂（黄原胶-瓜尔豆胶-卡拉胶）复配比例1∶2.5∶1、复合稳定剂添加量0.30%、乳化温度90℃、超声时间19.75 min和超声功率110 W。所得脱模剂的乳化分层指数为2.15%,黏度为419.6 m Pa·s,蛋糕粘连率为0.367%。脱模特性研究中,蛋糕粘连率随着脱模剂量的增加而不断减小,脱模效果显著。
- 脱模剂 /
- 棕榈液油 /
- 巴西棕榈蜡 /
- 乳化剂 /
- 乳化分层指数 /
- 黏度 /
- 响应面分析
Abstract: The experiment prepared palm olein-based special baking release agent, using the palm olein as base material and Carnauba Wax as auxiliary material and stabilizing with various additives. By single factor experiment and central composite design response surface methodology, the multiple regression models of emulsification separation ratio and the viscosity of palm olein-based special baking release agent were established to conduct the optimal preparation conditions for the release agent.The results showed that the best conditions were the content of palm wax 5.03%, the dose of lecithin high potency 2.0%, the proportion of PGPR- (Glyceryl Monosterate) 2 ∶ 3, the content of PGPR- (Glyceryl Monosterate) 1.0%, the proportion of composite stabilizer (Xanthan gum, Guar gum and Carrageenan) 1 ∶ 2.5 ∶ 1, the dose of composite stabilizer 0.30%, temperature90 ℃, ultrasonic time 19.75 min and ultrasonic power 110 W, respectively.The emulsification separation ratio and the viscosity of this baking mold release agent were 2.15% and 419.6 m Pa·s, respectively, the cake adhesion rate was 0.367%.In the study of mold release activity, the cake adhesion rate reduced with the increase of the concentration of release agent. The effect of mold release was remarkable.
- mold release agent /
- palm olein /
- Carnauba Wax /
- emulsifier /
- emulsification separation ratio /
- viscosity /
- response surface methodology

HTML全文

参考文献(22)

[1]	Seid Mahdi Jafari, Yinghe He, Bhesh Bhandari.Effectiveness of encapsulating biopolymers to produce sub-micron emulsions by high energy emulsification techniques[J].Food Research International, 2007, 40 (7) :862-873.
[2]	马来西亚棕搁油总署.棕搁油应用手册[M].6版.吉隆坡-马来西亚棕榈液油总署出版社, 2009, 2 (6) :3-22.
[3]	雷映平, 周光, 周小渝.高效水溶性混凝土模板脱模剂的研究[J].混凝土, 2002, 7 (9) :40-41.
[4]	赵云, 王琪敏, 王友斌.脱模剂配方优化解决塑封粘模问题[J].中国集成电路, 2016, 25 (10) :72-78.
[5]	邹海峰, 万里, 向立, 等.铝合金压铸用粉状脱模剂的开发与应用[J].特种铸造及有色合金, 2007, 27 (11) :850-852.
[6]	Brown M D.Mold release agent and method of application for die casting-US, US20050167071[P].2005.
[7]	Ohashi T.Adashi c/o Covalent Materials Corporation Core Technology Center30.Crucible for melting silicon and release agent used to the same-US, EP2116637[P].2009.
[8]	Lefevre J M, Mcconville P J, Chappell J M, et al.Release agent composition for tandem solid inkjet imaging systems having improved wettability[J].United states patent application, 2016, 7 (3) :21-29.
[9]	Dumond J J, Hong Y L, Lee H P, et al.Multi-functional Silicone Stamps for Reactive Release Agent Transfer in UV Rollto-Roll Nanoimprinting[J].Mater Horiz, 2016, 3 (2) :152-160.
[10]	Chen J H, Pavlisko J A, Lancaster R A, et al.Release agent donor member having fluorocarbon thermoplastic random copolymer overcoat-US, US 6721529 B2[P].2004.
[11]	Choquette S J, Ramos B L.Fabrication of embossed diffractive optics with reusable release agent-US, US6245412[P].2001.
[12]	Jennings D R.Release agent and method for use in baking applications-US, 7494682B2[P].2009.
[13]	马传国, 汪鸿, 刘会娟, 等.O/W型焙烤专用脱模剂的特性研究[J].中国油脂, 2013, 38 (4) :48-52.
[14]	孙定红, 唐洪权.焙烤脱模油油包水型乳状液稳定性探讨[J].中国食品添加剂, 2008, 17 (6) :84-87.
[15]	汪鸿.焙烤专用脱模剂的制备及特性研究[D].郑州:河南工业大学, 2012.
[16]	李芳芳, 段玉丰.相反转工艺制备巴西棕榈蜡乳液的粒径调控[J].涂料工业, 2015, 45 (2) :35-40.
[17]	檀付瑞, 李洪波, 桂慧, 等.超声分散对单壁碳纳米管分离的影响[J].物理化学学报, 2012, 28 (7) :1790-1796.
[18]	张杰, 葛武鹏, 陈瑛, 等.纳豆激酶高产菌株的选育及固态发酵技术[J].食品科学, 2016, 37 (3) :151-156.
[19]	Bi X, Yang J, Yu J, et al.Optimization on Preparation ofEthanolamine Hydroxyl Platinum (Ⅳ) by Response Surface Methodology[J].Rare Metal Materials&Engineering, 2016, 45 (8) :2176-2181.
[20]	Kinoshita K, Parra E, Hussein A, et al.From Single Microparticles to Microfluidic Emulsification-Fundamental Properties (Solubility, Density, Phase Separation) from Micropipette Manipulation of Solvent, Drug and Polymer Microspheres[J].2016, 4 (4) :49.
[21]	Kim J, Hwang J, Seo Y, et al.Engineered chitosan-xanthan gum biopolymers effectively adhere to cells and readily release incorporated antiseptic molecules in a sustained manner[J].Journal of Industrial&Engineering Chemistry, 2017, 46:68-79.
[22]	Krstonosic V, L Dokic, P Dokic, et al.Effects of xanthan gum on physicochemical properties and stability of corn oil-in-water emulsions stabilized by polyoxyethylene (20) sorbitanmonooleate[J].Food Hydrocolloids, 2009, 23 (8) :2212-2218.