HUI Yuanyuan, WANG Bini, ZHANG Fuxin, et al. An Electrochemical Aptasensor for Detection of Aflatoxin M1 Based on Reduced Graphene Oxide[J]. Science and Technology of Food Industry, 2021, 42(14): 249−256. (in Chinese with English abstract). doi: 10.13386/j.issn1002-0306.2020090147.
Citation: HUI Yuanyuan, WANG Bini, ZHANG Fuxin, et al. An Electrochemical Aptasensor for Detection of Aflatoxin M1 Based on Reduced Graphene Oxide[J]. Science and Technology of Food Industry, 2021, 42(14): 249−256. (in Chinese with English abstract). doi: 10.13386/j.issn1002-0306.2020090147.

An Electrochemical Aptasensor for Detection of Aflatoxin M1 Based on Reduced Graphene Oxide

  • In this study, a fast and sensitive electrochemical aptasensor for sensitive determination of AFM1 was successfully established based on reduced graphene oxide (RGO). RGO was prepared by reducing graphene oxide with jujube juice. The synthesized RGO was dropped onto the surface of GCE. AuNPs was modified on the surface of the RGO/GCE via electrodepositio. The thiolated aptamer (SH-Apt) of the AFM1 was immobilized on the surface of the AuNPs/RGO/GCE through strong Au-S bond. When AFM1 was present, AFM1 bound specifically to the aptamer forming Apt-AFM1 conjugates. The conjugates hindered electron transfer, causing a decrease of current signal. Differential pulse voltammetry (DPV) was used to monitor electrochemical signal. This electrochemical aptasensor was used to test aflatoxin B1 (AFB1), aflatoxin B2 (AFB2), ochratoxin A (OTA) and fumonisin B1 (FB1) to ensure the electrochemical aptasensor’s specificity. This electrochemical aptasensor was used to detect 1×10−7~5×10−4 ng/mL AFM1 to ensure the electrochemical aptasensor’s sensitivity. And this electrochemical aptasensor was used to detect goat milk to evaluate the practical use of electrochemical aptasensor. The results showed that RGO had the strongest conductivity when GO to jujube juice was 2:1 (V:V) and pH value was about 11. There was a good linear relationship between electrochemical signal and logarithm of AFM1 concentration in the range of 1×10−7~5×10−4 ng/mL with a low detection limit of 3.3×10−5 pg/mL. What’s more, the developed aptasensor was specific to AFM1 and did not respond to interfering mycotoxins, which suggested that the electrochemical aptasensor possessed an excellent selectivity for AFM1 detection. AFM1 electrochemical aptamer sensor was used to determine the content of AFM1 in goat milk. It was found that the sensor had high sensitivity and good selectivity, and it was expected to be applied to the rapid and accurate detection of mycotoxins in food industry.
  • loading

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return