• EI
  • Scopus
  • 中国科技期刊卓越行动计划项目资助期刊
  • 北大核心期刊
  • DOAJ
  • EBSCO
  • 中国核心学术期刊RCCSE A+
  • 中国精品科技期刊
  • JST China
  • FSTA
  • 中国农林核心期刊
  • 中国科技核心期刊CSTPCD
  • CA
  • WJCI
  • 食品科学与工程领域高质量科技期刊分级目录第一方阵T1
中国精品科技期刊2020
胡玲萍, 徐蓓蓓, 尹利昂, 姜晓明, 孙维维, 薛勇, 李兆杰, 薛长湖. 脱氟南极磷虾虾糜与大豆分离蛋白双螺杆挤压重组工艺研究[J]. 食品工业科技, 2018, 39(2): 217-223,228. DOI: 10.13386/j.issn1002-0306.2018.02.041
引用本文: 胡玲萍, 徐蓓蓓, 尹利昂, 姜晓明, 孙维维, 薛勇, 李兆杰, 薛长湖. 脱氟南极磷虾虾糜与大豆分离蛋白双螺杆挤压重组工艺研究[J]. 食品工业科技, 2018, 39(2): 217-223,228. DOI: 10.13386/j.issn1002-0306.2018.02.041
HU Ling-ping, XU Bei-bei, YIN Li-ang, JIANG Xiao-ming, SUN Wei-wei, XUE Yong, LI Zhao-jie, XUE Chang-hu. Study on twin-screw extrusion processing of defluorinated Antarctic krill surimi and soybean protein isolate[J]. Science and Technology of Food Industry, 2018, 39(2): 217-223,228. DOI: 10.13386/j.issn1002-0306.2018.02.041
Citation: HU Ling-ping, XU Bei-bei, YIN Li-ang, JIANG Xiao-ming, SUN Wei-wei, XUE Yong, LI Zhao-jie, XUE Chang-hu. Study on twin-screw extrusion processing of defluorinated Antarctic krill surimi and soybean protein isolate[J]. Science and Technology of Food Industry, 2018, 39(2): 217-223,228. DOI: 10.13386/j.issn1002-0306.2018.02.041

脱氟南极磷虾虾糜与大豆分离蛋白双螺杆挤压重组工艺研究

Study on twin-screw extrusion processing of defluorinated Antarctic krill surimi and soybean protein isolate

  • 摘要: 以冷冻南极磷虾为原料,制备一种平均氟含量为79.79 mg/kg干重的脱氟南极磷虾虾糜(AKS)。将脱氟虾糜与大豆分离蛋白(SPI)混合物料经双螺杆挤压作用进行蛋白质重组,以组织化度为指标,研究物料水分、机筒Ⅳ区加热温度、螺杆转速以及进料速度等工艺参数对组织化产品特性的影响,并用响应面分析优化工艺,得到虾糜-大豆分离蛋白组织化的最优工艺:混合物料水分为40%(虾糜:大豆分离蛋白=4:5),机筒一至四区的加热温度分别为70、90、120、140℃,螺杆转速为180 r/min,进料速度为30 kg/h,制备得到组织化度为2.18的暗红色条状组织化产物。

     

    Abstract: Defluorinated Antarctic krill surimi was prepared with the frozen Antarctic krill as raw material. The final fluorine content of defluorinated krill surimi was 79.79 mg·kg-1 on average by dry weight. Study on twin-screw extrusion texturization of krill surimi protein material was carried out with combination of AKS and SPI as raw material. Optimal process was obtained by single-factor experiment and response surface analysis,that was mixed material moisture of 40% AKS:SPI=4:5,heating temperature of 70,90,120 and 140℃,screw speed of 180 r/min,and feed rate of 30 kg/h. The texturization index of extrusion product was 2.18 with dark red color.

     

/

返回文章
返回